User`s manual

High Performance Low Cost Embedded Systems
When a graphic display interface is connected and a GUI is incorporated, a GUI based “command
window” will be established. Users can interact with the system via either a real keyboard or a virtual
“soft keyboard”. This is what this section describes.
In the “Application Programs” subgroup, click on the “terminal” icon, a command line window will
popup. You can either connect a USB keyboard (connect it after starting this command line window)
to your system or use the keyboard window at the bottom of the screen. You can set the command line
window’s display mode by configuring the settings in the “option” menu.
3.1.9 File Browser
In the “FriendlyARM” group click on the file browser icon:
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 60 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]