User`s manual
High Performance Low Cost Embedded Systems
These messages show that SD card access is successful. After the test is done it will automatically
return to the main menu.
(10) Testing CMOS camera
If you bought a CAM130 CMOS camera from us, you can test it with our utility. Before power on
your board, please connect your camera to the “CAMERA” interface on the board. Then power on the
board, select “10” in the main menu and enter to test.
Note: 如if you use a 7 inch screen or VGA, the LCD display may be different.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 48 -
Website : www.microarmsystems.com Email: service@microarmsystems.com Phone: 1-888-417-9266