User`s manual

High Performance Low Cost Embedded Systems
Now when the system reboots, the booting and login messages will be output at serial port 1 and
vivi’s messages will still be output at serial port 0.
(3) Saving configuration
Type “w” to save the new setting.
(4) Restoring default value
Type “r” to restore the default kernel setting.
(5) Returning to main menu
Type “q” to return to the BIOS main menu.
2.3 Board Device Testing
This section basically tells how to test some external devices without entering the operating system.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 33 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]