User`s manual

High Performance Low Cost Embedded Systems
(2) setting parameters
Type “s” to set parameters. There are two basic parameters (we don’t recommend to change other
parameters):
- Match_type
- Linux command line
The default value for MACH_TYPE is 782. For instance, if your compiled kernel’s MACH_TYPE
is 867, you can change this value to boot your kernel. Firstly you need to type the parameter name
“mach_type”, then type the value “867”, and finally, type “w” to save your change.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 31 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]