User`s manual

High Performance Low Cost Embedded Systems
31 GPB0 TOUT0/GPB0 32 GPB1 TOUT1/GPB1
33 CLKOUT0 9 UT1 H10 CLKOUT0/GPH 34 CLKO CLKOUT1/GP
CMOS Camera Interface
The S3C2440 has a CMOS camera interface. It is marked as CAMERA on the schematic. It is a 20
in 2.0mm connector, users can directly use the CAM130 module we provide. The CAM130 module
he schematic below presents its pin details.
p
does not have any circuits. It is basically just a converter and directly connects to a ZT130G2 camera
module.
Notes: the camera interface is a multiplexed port. It can be used as GPIO by setting corresponding
registers. T
CAMERA Name Multiplex CAMERA Name Multiplex
1 I2CSDA GPE15 2 I2CSCL GPE14
3 EINT20 GPG12 4 CAMRST GPJ12
5 CAMCLK EF GPJ11 6 CAM_HR GPJ10
7 CAM_VSYNC K GPJ9 8 CAM_PCL GPJ8
9 CAMDATA7 GPJ7 10 CAMDATA6 GPJ6
11 CAMDATA5 GPJ5 12 CAMDATA4 GPJ4
13 CAMDATA3 GPJ3 14 CAMDATA2 GPJ2
15 CAMDATA1 GPJ1 16 CAMDATA0 GPJ0
17 VDD33V 3.3V Power CAM 18 VDD_CAM VDD_
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 244 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]