User`s manual

High Performance Low Cost Embedded Systems
Network Interface
The mini2440 incorporates the DM9000 chip and can communicate with 10/100M networks. The
RJ45 connector includes coupling filters and does not need transformers. With a common network
cable, you can connect a router or switch to the mini2440.
Notes: all our mini2440 boards have the same MAC address, which can be set via software. For
Linux users, please refer to section 3.1.1 of this user’s manual. For WinCE users, please refer to the
BSP’s DM9000 driver and registry file (platform.reg).
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 240 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]