User`s manual

High Performance Low Cost Embedded Systems
7.2.2 Installing Bootloader
(1) Start the DNW application, connect the MINI2440 board to a host PC via a USB cable. If the
DNW’s title bar shows “USB:OK”, it indicates that the USB connection is a success. Select item
[v] to start downloading a supervivi
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 209 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]