User`s manual

High Performance Low Cost Embedded Systems
7.2 Installing Linux
7.2.1 Partition
Note: partitioning will delete all the data in Nand Flash
(1) Connect the MINI2440 board to a host PC, open a super terminal, power up the board and
enter the BIOS main menu
(2) Select item [x] to start partitioning the Nand Flash
Note: in this process, some Nand Flash might report bad data sections but this doesn’t matter.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 208 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]