User`s manual

High Performance Low Cost Embedded Systems
(3) Start the DNW application, connect the board to the host PC via a USB cable. If the DNW’s
title bar shows “USB:OK”, it indicates the USB connection is a success. Go to “USB Port” ->
“Transmit/Restore”
Select a backup file and click on “Open”
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 206 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]