User`s manual

High Performance Low Cost Embedded Systems
7.1.2 System Restore
Note: this section assumes the system has already been installed a USB driver and boots
from Nor Flash.
Make sure you have a backup file ready. This restore procedure will overwrite all the data
in Nand Flash！
The following steps show how to restore a system with a backup file
(1) Connect the MINI2440 board to a host PC via a serial cable, power up the board and enter the
BIOS main menu:
(2) Select item [r] to start the procedure
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 205 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]