User`s manual

High Performance Low Cost Embedded Systems
The third item, in this example “192.168.1.111” is the target board’s gateway IP,
The fourth item, in this example “255.255.255.0” is the subnet mask,
The fifth item is the board’s machine name (the user can give whatever name he likes)
“eth0” is the network adaptor’s name
This command is so long that it could be easily typed wrong. In this shipped CD, this command
has been written in the “nfs.txt” file for the customer’s convenience. The user can copy it directly.
Then type “boot” and press “enter” to boot the system via NFS.
Type “boot” and enter, system will be rebooted through NFS.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 147 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]