User`s manual

High Performance Low Cost Embedded Systems
.
Step 2: run the command below to add the compiler’s path to system variables:
#gedit /root/.bashrc
This is to edit the “/root/.bashrc” file. Append line “export
PATH=$PATH:/usr/local/arm/4.3.2/bin” in the opened file, save and exit the file.
Logout and login the system again (no need to reboot the system, just go to “start”-> “logout”),
the above settings will take into effect. Type “arm-linux-gcc –v”, if the messages depicted in the
screen shot below appear, it indicates the compile environment has been set up successfully.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 138 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]