User`s manual

High Performance Low Cost Embedded Systems
Chapter 5 Setting up Linux Development
Environment
5.1 Setting up Fedora 9.0 Development Environment
5.1.1 Installing Fedora 9.0
Note: users can download a Fedora 9.0 DVD image from
http://www.arm9down.cn/linux/fedora9.iso
Step1： Insert the first disk in the CDROM/DVD, set the boot sequence to CDROM in the
BIOS. After reboot the system, it will prompt the user to the following interface, just press “enter”.
Step2：The system will check the installation disk. It can be ignored, just press “Skip” to the
next step.
Copy right reserved © MicroArm Systems, Inc. 1612 2
nd
Ave. SW PMB#108, Cullman, AL 35055 - 102 -
Website : www.microarmsystems.com Email: [e-mail] Phone: [phone]