Specifications

36
Satellite Selection of the satellite to be
scanned
TP Index
Frequency selection
The selection options are
displayed
1 Add, 2 Delete, 3 Delete all
See following table for TP Index.
TP Frequency Setting of the frequency
Symbol Rate Setting of the symbol rate
Polarity H = horizontal, V = vertical
Scan Mode all = encrypted and unencrypted
channels
Free = only unencrypted channels
Search Start scan by pressing the OK key.
The channels and frequency found
are added.
Scanning of preset frequencies (transponders).
(Normal automatic scan)
Satellite Selection of the satellite to be
scanned
Scan Mode all = encrypted and unencrypted
channels
Free = only unencrypted channels
Scan Channel Selection between TV and radio or
only TV or only radio
Preset Scan
Search Start scan by pressing the OK key.
Auto Scan
(unique function
that can be used
without any
previous
knowledge),
Here you can scan a selected satellite (example:
Astra1 19.2° East) completely to search for new
channels. For this purpose, no special information is
needed. You can choose between free-to-air channels
and all TV and radio channels.
The procedure is initiated via “Scan”.