Specifications

27
Receiver
Caution!
Check the proper connection of all devices and
of the antenna before connecting the external
power pack or the 12 V cable of the receiver to
the power source and starting the receiver.
 Insert the mains plugs of the connected equipment in the mains
socket and switch it on..
 Switch on the AV channel of the TV set.
 Insert the power pack of the receiver in the mains socket. The
device is in normal mode. The green LED is lit.
 If you wish to operate the receiver with 12V, insert the 12V
mains cable in the “DC IN“ socket and connect it to your power
source.
The receiver is supplied with pre-programmed TV channels and
can be used directly. If you want to check if new channels are
available, initiate a scan for broadcasting stations. Read the
information further below for this purpose.



To get into standby mode, press the red
key at top right of the remote control. The
red LED of the receiver is lit.