Specifications

EP-BX7/BX7+
58
Award BIOS Setup
4-9 Change Supervisor or User Password
To change the password, choose the “SUPERVISOR PASSWORD or USER PASSWORD”
option from the CMOS SETUP UTILITY menu and press [Enter].
NOTE: Either “Setup” or “System” must be selected in the “Security Option” of the
BIOS FEATURES SETUP menu.
1. If CMOS is corrupted or the option was not used, a default password stored in the
ROM will be used. The screen will display the following message:
Enter Password:
Press the [Enter] key to continue after the proper password is given.
2. If the CMOS is corrupted or the option was used earlier and the user wishes to
change the default password, the SETUP UTILITY will display a message and ask for
a confirmation.
Confirm Password:
3. After pressing the [Enter] key (ROM password if the option was not used) or current
password (user-defined password), the user can change the password and store new
one in CMOS RAM. A maximum of 8 characters can be entered.