Specifications

EP-BX7/BX7+
53
On-Chip Primary PCI IDE: This option turns on/off the onboard primary IDE. The default is
Enabled.
Enabled: This activates the primary PCI IDE.
Disabled: This disable sthe primary PCI IDE and frees up the resource.
On-Chip Secondary PCI IDE: This option turns on/off the onboard secondary IDE. The
default is Enabled.
Enabled: This activates the secondary PCI IDE.
Disabled: This disable sthe secondary PCI IDE and frees up the resource.
USB Keyboard Support: This controls the activation status of an optional USB keyboard that
may be attached. The default is disabled.
Enabled: Enable USB keyboard support.
Disabled: Disable USB keyboard support.
Init Display First: If multiple video cards are used this specifies which bus will be the primary
display adapter. The default is PCI Slot.
PCI Slot: PCI Video card will be primary adapter.
AGP: AGP Video card will be primary adapter.
Power On Function: There are “Button Only”, “Hot Key” and “Any key” can be chosen by
this field that allows users to select one of these various functions as Power On Method for
their requirement.
The default value in this selection is “ Hot Key”. (Ctrl-F1)
Hot Key: User can press “Control Key” (Ctrl) and “Function Key” (from F1 to
F12) individually to power on the system.
The interval between “Ctrl” key and function Key (F1-F12)must be short.
Anykey: Press anykey to power on the system.
Button Only: This power on method is controlled by J3 (pw-on.) Use Power On
Button to power on the system.
Password: User can Power On the System by password, the password can be entered
from 1 to 5 characters. The maximum of password is 5 characters.
If user forget / lost the password, please go into BIOS setting to change the Power On
Method, or keyin another words as password instead of original one.
Award BIOS Setup