Specifications

EP-BX7/BX7+
47
functions when using the Intel Pentium II Processor. The default is Disabled
Doze Mode: The “Doze” mode timer starts to count when no “PM events” have occurred.
Standby Mode: When the standby mode timer times-out, it will enter the standby mode and retain
CPU at a slow working speed. The screen will be blanked out.
Suspend Mode: This function works only when the Pentium II Processor is installed. The
timer starts to count when “System Standby” mode timer is timed out and no “PM Events” are
occurring. Valid range is from 1 minute up to 1 hour.
HDD Power Down: HDD Standby timer can be set from 1 to 15 minute(s).
Throttle Duty Cycle: Sets how much performance will be lost during a power management
mode. Default is 62.5%.
PCI/VGA Act-Monitor: Use this option if your monitor has advanced power saving features.
The default is Disabled
Enabled: Your monitor’s power features will be included in power
management.
Disabled: Your monitor’s power features will not be included in power management.
Soft-Off by PWR-BTTN: Use this to select your soft-off function.
The default is Instant Off.
Instant Off: Turns off the system instantly.
Delay 4 Second: Turns off the system after a 4 second delay. If momentary press of
button, the system will go into Suspend Mode. Press the power botton
again to take system out of Suspend Mode.
CPUFAN Off In Suspend: This option is used to set if the CPU fans will turn off furing
suspend mode. The default is Enabled
Enabled: The system will turn off the CPU fans furing suspend mode.
Disabled: The system will not turn off the CPU fans furing suspend mode.
PowerOn by Ring: This option is used to set the remote ring in feature. This option is only
available when Power Loss Recovery is Enabled.
The default is Enabled.
Award BIOS Setup