Specifications

EP-BX7/BX7+
43
3: Provides better memory compatibility.
Auto: CAS Latency Time programming depend on information read from DRAM SPD.
SDRAM Precharge Control: The default is Disabled.
Enabled: Enabled the option.
Disabled: Disabled the option.
DRAM Data integrity Mode: Use this option to configure the type of DRAM in your system.
The default is Non-ECC.
Non-ECC: If your memory is Non-ECC, choose this option.
ECC: If your memory is ECC memory, choose this option.
System BIOS Cacheable: This allows you to copy your BIOS code from slow ROM to fast
RAM. The default is Disabled.
Enabled: The option will improve system performance. However, if any program writes to
this memory area, a system error may result.
Disabled:System BIOS non-cacheable.
Video BIOS Cacheable: This option copies the video ROM BIOS to fast RAM (C0000h to
C7FFFh). The default is Enabled.
Enabled: Enables the Video BIOS Cacheable to speed up the VGA Performance.
Disabled: Will not use the Video BIOS Cacheable function.
Video RAM Cacheable: This option allows the CPU to cache read/writes of the video RAM.
The default is Enabled.
Enabled: This option allows for faster video access.
Disabled: Reduced video performance.
8 Bit I/O Recovery Time: This function allows you to set the wait state that is added to an 8 bit
ISA instruction originated by the PCI bus. The default is 1.
NA: No wait state 8: 8 wait states
1: 1 wait states 2: 2 wait states
3: 3 wait states 4: 4 wait states
5: 5 wait states 6: 6 wait states
7: 7 wait states
Award BIOS Setup