Specifications

EP-BX7/BX7+
41
Typematic Rate (Chars/Sec): This is the number of characters that will be repeated by a
keyboard press. The default is 6.
6: 6 characters per second. 8: 8 characters per second.
10: 10 characters per second. 12: 12 characters per second.
15: 15 characters per second. 20: 20 characters per second.
24: 24 characters per second. 30: 30 characters per second.
Typematic Delay (msec): This setting controls the time between the first and the second
character displayed by typematic auto-repeat. The default is 250.
250: 250 msec. 500: 500 msec.
750: 750 msec. 1000: 1000 msec.
Security Option: This category allows you to limit access to the System and Setup, or just to
Setup. The default is Setup.
System: The system will not boot and the access to Setup will be denied if the correct
password is not entered at the prompt.
Setup: The system will boot; but the access to Setup will be denied if the incorrect
password is not entered at the prompt.
PCI/VGA Palette Snoop: This field controls the ability of a primary PCI VGA controller to
share a common palette (When a snoop write cycles) with an ISA video card. The default is
Disabled.
Enabled: If an ISA card is connected to a PCI VGA card via the VESA connector, and
that ISA card connects to a VGA monitor, then that ISA card uses the
RAMDAC of the PCI card.
Disabled: Disables the VGA card Palette Snoop function.
OS Select For DRAM > 64MB: Some operating systems require special handling. Use this
option only if your system has greater than 64MB of memory.
The default is Non-OS2.
OS2: Select this if you are running the OS/2 operating system with greater than
64MB of RAM.
Non-OS2:Select this for all other operating systems and configurations.
Report No FDD For WIN95: This option allows BIOS to indicate whether WIN95 is with FDD
or not. The Default value is Yes.
NO: Report No FDD for WIN95.
YES: Report FDD for WIN95
Award BIOS Setup