Specifications

EP-BX7/BX7+
39
You should then run an anti-virus program to locate the virus. Keep in mind that this feature
protects only the boot sector, not the entire hard drive.
The default value is Disabled.
Enabled: Activates automatically when the system boots up causing a warning message
to appear when anything attempts to access the boot sector.
Disabled: No warning message will appear when anything attempts to access the boot
sector.
Note: Many disk diagnostic programs that access the boot sector table can trigger
the virus warning message. If you plan to run such a program, we recommend
that you first disable the virus warning.
CPU Internal Cache: This controls the status of the processor’s internal cache area. The
default is Enabled.
Enabled: This activates the processor’s internal cache thereby increasing performance.
Disabled: This deactivates the processor’s internal cache thereby lowering performance.
External (L2) Cache: This controls the status of the external (L2) cache area.
The default is Enabled.
Enabled: This activates the motherboard’s L2 cache thereby increasing performance.
Disabled: This deactivates the motherboard’s L2 cache thereby lowering performance.
CPU L2 Cache ECC Checking: This controls if the CPU’s L2 cache will support error
Checking and correcting (ECC). The default is Disabled.
Enabled: Enabled ECC support for CPU’s L2 cache. Performance will decrease
2%~4%.
Disabled: Disabled ECC support for CPU’s L2 cache.
Processor Number Feature: Pentium III or later CPU new feature. The default is Enabled.
Enabled: Processor serial number readable.
Disabled: Processor serial number disabled.
Award BIOS Setup