Specifications

EP-BX7/BX7+

Section 4

AWARD BIOS SETUP

BIOS Instructions

Award’s ROM BIOS provides a built-in Setup program which allows user to modify the basic

system configuration and hardware parameters. The modified data will be stored in a battery-

backed CMOS, so that data will be retained even when the power is turned off. In general, the

information saved in the CMOS RAM will stay unchanged unless there is a configuration

change in the system, such as hard drive replacement or a device is added.

It is possible for the CMOS battery to fail, this will cause data loss in the CMOS only. If this

does happen you will need to reconfigure your BIOS settings.

To enter the Setup Program :

Power on the computer and press the <Del> key immediately, this will bring you into the BIOS

CMOS SETUP UTILITY.

Figure 1: CMOS Setup Utility

Award BIOS Setup