Specifications

EP-BX7/BX7+

PREFACE

This User’s Manual specifies the board layout, components, connectors, power and

environmental requirements, and the BIOS for the EP-BX7/BX7+ mainboard. It

describes the standard mainboard product and available manufacturing options. The

manual is intended to provide detailed, technical information about the mainboard and

its components to the vendors, system integrators, other engineers and technicians,

and the general audience who need this information.

What This Document Contains

Chapter Description

1 Introduction

2 Overview

3 Hardware Installation

4 Award Bios Setup

5 Appendix A-E

Safety Instructions

1. Always read the safety instructions carefully.

2. Keep this User’s manual for furture reference.

3. Keep this equipment away from humidity.

4. Lay this equipment on a reliable flat surface before setting it up.

5. The openings on the enclosure are for air convection hence protects the equipment

from overheating. DO NOT COVER THE OPENINGS.

6. Make sure the voltage of the power source and adjust properly 110/220V before

connecting the equipment to the power inlet.

7. Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

8. Always Unplug the Power Cord before inserting any add-on card or module.

9. All cautions and warnings on the equipment should be noted.

10. Never pour any liquid into the opening that could damage or cause electrical

shock.

11. If any of the following situations arises, get the equipment checked by a service

personnel:

• The power cord or plug is damaged

• Liquid has penetrated into the equipment

• The equipment has been exposed to moisture

• The equipment has not work well or you can not get it working according to

User’s Manual.

• The equipment has dropped and damaged

• If the equipment has obvious sign of breakage