Specifications

EP-BX7/BX7+
11
OVERVIEW
The EP-BX7/BX7+ mainboard’s features are summarized below.
Form Factor
Processor
Chipset
Memory
I/O Control
Peripheral
Interfaces

ATX

370 Processor including PPGA & FC-PGA

Operating at 300-800MHz

Intel 82443BX AGPset

168-pin DIMM x 4

Supports up 1 GB of SDRAM(minimum of 8MB)
on board

EP-BX7/BX7+ will support Error Checking and
Correcting (ECC) when using paritys DRAM
memory modules

Automatically detect at 66 MHz Synchronous
DRAM memory (SDRAM) at 66MHz or 100MHz

Provides independent high performance PCI IDE
interface capable of supporting PIO Mode 3/14
and Ultra DMA 33 devices.

Only the BX7/BX7+ supports Ultra DMA 66
devices

Support ATAPI devices on both Primary and
Secondary IDE interface
 Designed with Winbond W83977TF/EF Multi I/O

1 floppy port

1 parallel port

2 serial ports
Note
：
Japanese “Floppy3 mode” is also
supported.