Specifications

CHAPTER 2CHAPTER 2

CHAPTER 2

HARDHARD

HARD

ARE INSTARE INST

ARE INST

ALLAALLA

ALLA

TIONTION

TION

2-39

2.18 Modem W2.18 Modem W

2.18 Modem W

akak

e Up Connector: JMDM1e Up Connector: JMDM1

e Up Connector: JMDM1

The JMDM1 connector is use for the Modem add-on card which supports

the Modem Wake Up function. To use this function, you need to set the

“Resume By Ring” to enable at the BIOS Power Management Setup.

Note: Modem wake-up signal is active “low”.

PIN SIGNAL

1NC

2 GND

3 MDM_WAKEUP

4NC

5 5VSB

Note: To be able to use this function, you need a power supply that

provide enough power for this feature.

(Power supply with 750 ma 5V Stand-by)

JMDM1