Instruction manual

MS-7033 M-ATX Mainboard
4-18
Once the installation is complete, go to Start ---> Programs --->VIA --->
RAID to enable VIA RAID TOOL.
Using VIA RAID Tool
The main interface is divided into two windows and the toolbar above contain
the main functions. Click on these toolbar buttons to execute their specific functions.
The left window pane displays the controller and disk drives. The right window pane
displays the details of the controller or disk drives. In this model, the available fea-
tures are as following:
View by Controllers
View Event log
Check All Disks
Help Topics
After the software has finished installation, it
will automatically start every time Windows is initiated.
You may double-click on the icon shown in the
system tray of the tool bar to launch the VIA RAID Tool
utility.