Instruction manual

Introduction to VIA VT6410 IDE RAID

4-5

Create Disk Array

Use the up and down arrow keys to select the Create Array command and

press <Enter>.

MSI Reminds You...

The “Channel”, “Drive Name”, “Mode” and “Size (GB)” in the following

example might be different from your system.

Select Array Mode and press <Enter>, a list of array modes will appear.

Highlight the target array mode that you want to create, and press <Enter> to confirm

the selection. If RAID 1 is selected, an option list will popup and enable the users to

select Create only or Create and duplicate. Create only will allow BIOS to only

create an array. The data on the mirroring drive may be different from the source

drive. Create and duplicate lets BIOS copy the data from the source to the mirroring

drive.