Instruction manual

2-20
MS-7033 M-ATX Mainboard
Connected to JSPD1
SPDIF Bracket (Optional)
SPDIF Connector: JSPD1
The connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission.
The JSPD1 supports SPDIF output only and
can be connected to an external SPDIF Bracket for
digital audio transmission.
1 VCCS
2 SPDIF0
3 GND
JSPD1 Pin Definition
PIN SIGNAL
JSPD1
1
3
IEEE 1394 Connectors: JFW1 (optional)
The mainboard provides one 1394 pin headers that allow you to connect IEEE
1394 ports via an external IEEE1394 bracket.
Pin Definition
PIN SIGNAL PIN SIGNAL
1TPA+ 2 TPA-
3 Ground 4 Ground
5 TPB+ 6 TPB-
7 Cable power 8 Cable power
9 Key (no pin) 10 Ground
JFW1
1
9
2
10