Instruction manual

2-6
MS-7033 M-ATX Mainboard
10. Align the holes on the mainboard
with the heatsink first. Pull down
the fan/heatsink until its four clips
get wedged in the holes of the
mainboard.
12.Turn over the mainboard to con-
firm that the clip-ends are cor-
rected inserted.
locking
switch
11. Press the four hooks down to fas-
ten the fan. Then rotate the lock-
ing switch (refer to the correct di-
rection marked on it) to lock the
hooks again.
9. Engage the load while pressing
down lightly onto the load plate, and
then secure the lever with the hook
under retention tab.
MSI Reminds You...
1. Confirm if your CPU heatsink/cooler is firmly installed before
turning on your system.
2. Check the information in PC Health Status of H/W Monitor in
BIOS (refer to p.3-20 for details) for the CPU temperature.
3. Make sure that the CPU socket pins are not turned up or pressed
down.