Instruction manual

RFT9709 Transmitter Instruction Manual 57
Appendix
F Decontamination and
Return Goods Policy – Europe
To conform with Dutch ARBO regulations and to provide a safe working
environment for our employees, Micro Motion has instituted the following
Return/Repair conditions. Strict adherence to these conditions is
required.
Returned equipment that does not conform to the requirements listed
below will NOT be processed. If Micro Motion finds evidence of
contamination, we may, at our option, have the sensor cleaned or
returned AT YOUR EXPENSE, after notifying you of the contamination.
1. The equipment must be COMPLETELY cleaned and decontaminated
prior to shipment to Rosemount. This decontamination procedure
applies to the sensor tubes, sensor case exterior, and the transmitter.
2. A Repair and/or Warranty Request Sheet (RWRS) is REQUIRED for
all process fluids that have been in contact with the equipment. This
includes fluids used to clean the equipment.
3. If the equipment being returned has been used on a food-grade
process fluid, for which no RWRS is available, a statement listing all
process fluids and certifying decontamination is acceptable. Please
fill out the accompanying Decontamination Statement PRIOR to
returning the equipment.
4. The RWRS document must be included in the shipping package.
09rtrn2.fm Page 57 Tuesday, March 2, 1999 9:47 AM