Instruction manual

RFT9739 Field-Mount Transmitter Instruction Manual

Appendix

B Ordering Information

RFT9739 model number matrix

Code Transmitter model

RFT9739 RFT9739 transmitter

Code Housing options

E Field mount, without display, NEMA 4X, explosion-proof

Field mount, with display, NEMA 4X

Code Power supply

4 85 to 250 VAC

5 20 to 30 VDC

Code Configuration

S Standard

E Enhanced EMI immunity (CE compliant) — requires installation with Micro Motion

cable type CPLTJ or CFEPJ installed in conduit, or type CPLTS, CPLTA, CFEPS,

or CFEPA installed with approved cable glands

Code Approval

M Micro Motion standard — no approvals

U UL intrinsically safe — U.S.A. approvals agency

C CSA — Canadian approvals agency

B CENELEC intrinsically safe sensor outputs — European standards

organization

F CENELEC intrinsically safe sensor outputs/flameproof transmitter —

European standards organization; not available with housing code D

S SAA — Australian approvals agency; not available with Model DL65,

D600, or DT sensors

Code Glands

Available with approval codes M, C, B, F, and S

Available with approval code U only with housing code D

A No fittings or glands

Available only with approval code U and housing code E

J 1X explosion-proof seal fitting (any cable)

K 3X explosion-proof seal fitting (any cable)

Available only with approval code B (non-EExd)

B 1X gland, nickel-plated brass (7-12.5 mm)

C 3X gland, nickel-plated brass (7-12.5 mm)

Available only with approval code F (flameproof EExd) and housing code E

D 1X gland, nickel-plated brass (8-12 mm/10.5-16 mm)

E 1X gland, SS (8-12 mm/10.5-16 mm)

F 3X gland, nickel-plated brass (8-12 mm/10.5-16 mm)

G 3X gland, SS (8-12 mm/10.5-16 mm)