Instruction manual

RFT9739 Field-Mount Transmitter Instruction Manual 95
Appendix
E Label Maintenance and
Replacement
Maintaining and replacing labels
Micro Motion product safety labels have been designed in accordance
with the voluntary standard, ANSI Z535.4. If any of the labels on the
transmitter is illegible, damaged, or missing, promptly have new ones
installed. The transmitter includes the safety label illustrated below.
Contact Micro Motion for replacement labels:
• In the U.S.A., phone [phone]
• Outside the U.S.A., phone [phone]
• In Europe, phone [phone]
• In Asia, phone [phone]
Figure E-1. Label number 3002168
For additional information, see
Section 4.1
, page 15.
WARNING
PN 3002168 Rev. B
Explosion Hazard
To maintain intrinsic safety,
do not operate transmitter
without partition.