Installation guide

6 Model 3500 Transmitters or Model 3300 Peripherals - Panel Mount
Planning
Figure 1-1: Panel-mount installation kit
1.2 Choose a location
Choose a location for the transmitter based on the requirements described below.
1.2.1 Environmental requirements
Install the Model 3300 or Model 3500 where the ambient temperature is between –4 to
+140 °F (–20 to +60 °C).
1.2.2 Dimensions
See Figure 3-1 and Figure 3-3 for illustrations of screw-type connectors versus I/O cables.
Model type Dimension drawing
Screw-type wiring connectors Figure 1-2
I/O cables Figure 1-3
Power supply wiring connector
Retaining-clip assembly for power supply
wiring
2 x mounting bracket with screw
Frame
Bezel
Panel thickness:
5/64 inch (2 mm) minimum
1/2 inch (13 mm) maximum