Operating instructions

MICRO PANEL XV-102 3.5" 6. Operation
M002869-02, 07/2009 41
6.4 Inserting and removing an SD card
Inserting the SD card
1 Push the SD card into the SD slot (A) until it snaps into position.
Removing the SD card
1 Push the SD card in the SD slot (A) all the way in.
#
##
# This releases the lock mechanism and the SD card comes out of the SD slot a little.
2 Remove the SD card from the SD slot.
!
The SD slot on device version A (XV-102-A#) has no function!
Fig. 21 SD slot (A)
CAUTION
Data loss
During a write operation, the SD card may lose data or may be destroyed if it is re-
moved or if there is a power failure.
! Only insert the SD card when the device is in a de-energized state.
! Avoid write operations to SD cards. Reasons:
- The number of write cycles possible on SD cards is limited.
- A power failure during write operations will most likely lead to loss of data.
! Only remove the SD card when the device is in a de-energized state.
! Before switching off, ensure that no software write operations to the SD card are
in progress.
!
Do not apply any force (SD cards are protected against reverse insertion).