Operating instructions

5. Installation MICRO PANEL XV-102 3.5"
38 M002869-02, 07/2009
4 Fit the supplied threaded pins in the retaining brackets beforehand.
#
##
# The tips of the threaded pins must point towards the wider ends of the retaining brackets.
5 Fit the device from the front into the mounting cutout.
6 Clip on the retaining brackets in the recesses provided for them on the device as shown below and
fix the device by tightening the threaded pins.
Fig. 19 Threaded pin pre-fitted in a retaining bracket
CAUTION
Mechanical damage to the device
Tightening the threaded pins too tightly may damage the device.
! Tighten threaded pins with a max. tightening torque of 0.15 Nm.
Fig. 20 Devices with four retaining brackets