Hardware manual

MICRO PANEL Quick Start Guideline XV-2xx Systems
Hardware Structure
2.3.1 C
OMPACT FLASH
The CF-card (OS-flash) includes the operating system for the unit and is mandatory for operation. The
OS-flash may only be inserted when the power is off.
For tue guarantee of a troublefree operation we recommend the use of the CF-
cards offered by Micro innovation. When using CF-cards of other suppliers
Micro innovation delines any support as well as responceablity for any
consequential damages.
Data loss.
If a CF-card is removed during operation of the unit a data loss or coruption
can occur.
- only incert or remove CF-cards in power off status.
- secure the CF-card with the slot interlock.
- writing to the CF-card should be avoided. With simultaneous voltage drop
this can lead to data loss.
2.3.2 C
ONNECTION POWER SUPPLY
+24VDC GND 0V
Connection plug: Phoenix Contact MSTB 2.5/3-ST-5.08
Phoenix Contact Art.Nr 1757022;
It is included in the delivery
(Perspective from the wiring view)
+24 VDC Power supply +24VDC
GND Ground, connect the plug blind (does not need to be connected)
0 V Power supply 0V (potential free)
Subject to technical changes
M001789-01.DOC
© by Micro Innovation
7