Hardware manual

Quick Start Guideline XV-2xx Systems MICRO PANEL

The first GALILEO Project

When communicating to

another controller the address

has to be entered specific to

the protocol. In the dialog “Set

Address” you can see and

select the possible

nomenclature needed.

According to the desired

nomenclature the following

input fields for addressing the

variables are possible.

The displayed example shows the address of a variable

for a S7 controller over MPI. The nomenclature of a

variable is selected out of the data block of the controller.

The address is herewith select as DB12 byte 144.

After following the address the variable in the variables list is marked red (=addressed).

Subject to technical changes

M001789-01.DOC