Hardware manual

Quick Start Guideline XV-2xx Systems MICRO PANEL

The first GALILEO Project

5.5 GENERATE VARIABLE STRUCTURE

In our small example we are displaying a numeral value of the PLC. For this we must first generate

the used variables. This is acompished over the register variables.

If the intergrated PLC is used and the symbol file of the PLC

was compiled right the the variables names can be

imported.

Change to the register „Variables“; move the mouse cursor

to any variable type e.g. “bit” and press the right mouse

button. A dialog will open where you have to select “Import”.

Select the symbol file of the PLC program as the

import file. You can find the symbol file in the

same directory where the PLC program is saved

on the PC. Confirm the dialog with pressing the

“Start” button. Also see chapter “„

4.5 Symbol-

File Configuration

“.

Through the import of the PLC variable „hmiCounter“ from Type WORD

the variable is inserted into the variable list. The red marking of the

variable shows that a addressing to the PLC has already occured

Subject to technical changes

M001789-01.DOC