Hardware manual

MICRO PANEL Quick Start Guideline XV-2xx Systems

The first GALILEO Project

5.2 SELECT UNIT

The window “Unit Type” is opened automatically when a new project is generated. It can also be

opened over the menu ConfigurationÆUnit Type… and at a later time edited.

Select the unit type:

For the selection field

“Format” the option landscape

is chosen whereby the unit

will be used in horizontal

operation.

You can work with 256

colours (grey levels). 5

colours of that are displayed.

5.3 SELECT PLC

The window “Select PLC” will also be opened automatically when a new project is generated. It can be

opened over the menu ConfigurationÆSelect PLC… and edited later.

Depending on the unit type CAN, MPI or RS232 different communication types are available. Select

under “Add” the communication to the PLC.

The following example uses

the integrated PLC as

controller type. Also more

than one controller can be

selected. So that one PLC

can be connected over MPI

(Onboard) and another one to

the internal PLC over

CoDeSys (local).

To keep in mind is the

different types of addressing

the variables.

After confirmation

Selection of the integrated PLC: CoDeSys (local)

With OK the new project is configured.

Subject to technical changes

M001789-01.DOC