Hardware manual

Quick Start Guideline XV-2xx Systems MICRO PANEL

The first PLC Program

- Select the compact flash root in the directory through selecting the disk (disk character).

- Continue with the setup.

- After completing the installation put the OS-flash back in the unit. (The unit has to have power

off).

- Start the unit new to start the PLC-runtime.

• Installation to a local directory: all files of the PLC runtime will be installed to a local directory

on your PC.

Required steps:

- Fully complete setup.

- Copy the whole contents of the directory “XV200” (you can find it in the newly created

directory on you PC) manually in the main directory on the OS-flash (supplied CF-card of the

unit).

- Start the unit new to start the PLC-runtime.

After successfully installation of the PLC runtime and reboot of the unit a status display for the PLC

runtime will appear (after clicking “PL…” in the program menu).

If a visualization is already installed and running the on unit and covering the status display you can

stop the visualization with help of the button (next to the USB-device port).

Subject to technical changes

M001789-01.DOC