Hardware manual

MICRO PANEL Quick Start Guideline XV-2xx Systems

The first PLC Program

- Select „OS 2…“ and click on the button “further >”.

- Enter the IP-address of the unit.

- Continue the setup procedure.

- After finishing the installation restart the unit to start the PLC runtime.

• Compact Flash Installation: The installation of the PLC runtime applies directly to the OS-flash.

(Supplied CF-card of the unit).

Required steps:

- Insert the OS-flash in into the card adapter of your PC.

- Continue the setup routine on your PC until the following dialog appears.

Subject to technical changes

M001789-01.DOC