Hardware manual

Quick Start Guideline XV-2xx Systems MICRO PANEL

The first PLC Program

4.2 INSTALLATION OF THE PLC RUNTIME SYSTEM ON THE UNIT

Requirement:

Die MXpro Software (CoDeSys) must be installed correctly on the PC.

The OS-flash included in the unit does not have the PLC runtime installed. The PLC runtime can be

installed on the OS-flash with the tool „SetupTargetFirmware“.

Procedure:

Start the tool „SetupTargetFirmware“ on your PC through clicking StartÆProgramsÆMicro

InnovationÆMXpro V2.3.3 SP1ÆTargetFirmwareÆTargetFirmwareWinCE_V2.40.exe

After starting the setup the follow the dialog until the following window appears.

Select the desired installation type and execute the next steps:

• FTP Installation (suggested routine: The installation of the PLC runtime is done over FTP.

Required step:

- Ensure that the unit is connected to your PC over ethernet.

- Start the unit.

- Start the FTP-server on the unit over clicking Start

Programs

Communications

FTP

Server.

- Follow the setup on the PC further unit the following dialog window appears.

Subject to technical changes

M001789-01.DOC