Hardware manual

Quick Start Guideline XV-2xx Systems MICRO PANEL

Commissioning of the Unit

A window will then open with the question „Do you want to restart now?“ Acknowledge this with “yes”.

The panel will now restart the system with the new IP address.

3.4.2 W

IRING

Connect the unit directly to the PC with an ethernet crossover cable. If you use an ethernet hub or

switch us a 1-to-1 patch cable.

3.4.3 T

EST THE ETHERNET CONNECTION

To test the connection open the “Dos-Shell” on your PC over Start

Programs

Accessories and ping the IP address of the unit.

Test the connection to the unit with “Ping”

If the unit does not answer then contact your network administrator.

Î Further information: Hardware manual XV200 5.7“ system ([1] see chapter 1.1)

Î Further information: MICRO PANEL with Windows CE ([4] see chapter 1.1)

Subject to technical changes

M001789-01.DOC