Basic Webcam Model IC50C User’s Manual Before installing device it is recommended that your operating system contain the most recent updates and service packs available. Install the software first before connecting the webcam to your PC. You will be prompted to restart your PC during this installation. Close and save all work before installing this device.
FCC STATEMENT This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
Table of Contents Getting Started……………………………..…………………………………………………………..….…. Page 4 Installing Your Webcam…...………………….……………..………………………………………….…… Page 5 Using EZ Media Box 2.0™…………………………………………………………………………………… Page 6 Troubleshooting…...………………….…………………………………………………………….………… Page 7 Helpful Hints and Technical Support…...………………….………………………..…..………..
Getting Started Congratulations on the purchase of your new Basic Webcam. The Basic Webcam is compatible with IBM® or compatible PCs with an available USB port. It is supported by Windows® 98SE, Me, 2000, XP and Vista™.
Installation Procedures During the software installation, you must install the DRIVER. You can install the E-Z Media Box 2.0™ software at a later time. Frequently check for updated webcam software by visiting our website, www.microinv.com. Turn on your computer. Note in order for you to use your webcam you must install the software before plugging the webcam into your PC. Insert the CD into your PC and follow the on-screen instructions.
Using EZ Media Box 2.0™ This program will allow you capture, edit and organize your video and other multimedia files. If you did not install the EZ Media Box 2.0™ software during the initial software installation, reinsert the Basic Webcam software CD into your PC. Once the installation screen appears choose “Install EZ Media Box 2.0 Software”. Follow the on-screen instructions. Once the software has been installed correctly, you can begin recording video, creating movies or editing pictures.
Troubleshooting Problem “No capture device found” error “Camera not connected” error Resolution Make sure you have connected the webcam correctly into the USB port or try a different USB port on your PC. Try removing the previous driver and reinstalling the software. There may be a conflict with previous camera/scanner software installed on your PC. You may need to remove the previous software before using this device.
Helpful Hints The following hints will help you achieve the best results with your webcam: Webcam placement • • Position the webcam so that the subject is centered. Place the webcam on a steady surface. Lighting • • • Use sufficient lighting. Place the light source behind the camera and facing the subject. Do not aim the webcam directly at the light source. Maintenance • • • Keep the webcam away from moisture and extreme temperature.
