User manual

Microgate Srl P. 71 / 74
3.5.3 CHECK UPDATE
When this button is pressed, the system will check if the installed version is the most recent one. If it is not,
Witty Manager proposes the choice of downloading the most recent version.
Please note: before pressing <Check Update> check that the Internet connection is active.
3.5.4 RFID TAG CHECK
The function is used to check an RFID bracelet. Connect a Witty RFID turned on to a Witty RFID. Approach
the reader with a bracelet. If the LEDs turn on green, the bracelet was written correctly and the bib number
can be seen (number 1, for example). If the bracelet was not written correctly, the LEDs will turn on red and
the bib number will be indicated as 0.
3.5.5 ABOUT
This section displays respectively:
 The version of the Witty Manager software, as well as the version of its database
 The most recent firmware versions available for the timer and the photocell
 Hardware and software characteristics of the computer
If our Technical Support asks for these data, select the field using the cursor and right-click to COPY them.
You may then PASTE them into the e-mail and send it. Press the X in the top right corner to close the About
box.