User manual

Microgate Srl P. 67 / 74
3.5 UTILITY
3.5.1 BASIC SETTINGS
Allows to change the following settings. Please remember to press <Save> before exiting.
3.5.1.1 LANGUAGE
The language can be changed at any moment during the use of the program and does not require a restart.
Select the desired language from the drop-down menu and press <Save>.
3.5.1.2 UNITS
Makes it possible to set the type of unit of measurement with which to view the speed base length values.
If using the international unit, the values are entered in meters/cm, whereas the imperial unit uses
feet/inches (ft/in).
3.5.1.3 SPEED
Select the unit of measurement (choosing between meters per second, km/h, miles/hour, and knots) for
displaying the speeds, if the lengths have been entered in the relevant bases.
3.5.1.4 PRECISION
Choose the time displaying accuracy (seconds, tenths, hundredths, or thousandths) for the times displayed
in the result lists.
It is important to know that this configuration sets only the displaying of times, which are always calculated
as precisely as possible, regardless of the configuration (1/25000 of a second).
Similarly, data exporting from Witty to PC is also always carried out with the highest precision and will not
be affected by this function.
3.5.1.5 WEBCAM
A webcam attached to the PC can be used to take pictures of the athletes when entering them into the
database. Choose one of the connected webcams from the drop-down menu. Use the <Test> button to
check if it is working, and, if necessary, configure its parameters. Press <Confirm> to save the settings.