User manual

Microgate Srl P. 60 / 74
If the database contains more than one athlete with the same bib, when transferring the tests, the user is
asked which athlete the result should be associated to.
3.4.4 WITTY FIRMWARE UPDATE
If, when launching the software, a message is displayed saying that there is a new firmware version
available, using this function it can be downloaded and then installed on the device.
After confirming the action, the firmware is stored on the timer; at the end of this procedure, disconnect
the Witty timer from the PC and restart it (switch off and on). After the boot-up, the firmware is checked,
loaded, and after a further restart, the timer is started with the new firmware. Any possible data on the
timer (athletes, test definitions, tests) will not be deleted. Nonetheless it is advisable to download all data
to the PC (see chap. 3.4.3) before uploading the firmware (this means performing a backup).