User manual

Microgate Srl P. 40 / 74
3.2.4.4 REPETITIONS
It is possible to use the drop down menu at the bottom of the toolbar to indicate how many times to repeat
the circuit. The number of impulses necessary to end the test will therefore be the number multiplied by the
number of repetitions (in the example, 4 x 3 = 12)
3.2.4.5 TRANSFER OF SEQUENCES TO WITTY
If the option “Test definition" is selected while the data is being transferred to the Witty timer (see
chap.3.4.2), ALL the created sequences are transferred to the timer, even those that have not been assigned
a definition. This makes it possible to create sequences and then assign them later on the timer to a test
definition created directly on the device.
Once the sequence is transferred or assigned to a test definition, it becomes "read-only”, meaning it cannot
be changed and can only be read. If changes must be made to a sequence that was already used, it must be
duplicated and then the copy is changed with a different name.
The sequences assigned to a test definition obviously cannot be cancelled.