User manual

Microgate Srl P. 26 / 74
If columns have already been added and a new one has to be added between two columns, proceed as
follows: select the column AFTER the one to add, choose the required column from the drop-down menu
and press <Insert>. Similarly it is possible to delete a column which is no longer needed, by selecting the
column and pressing <Delete>. Please note that at the moment there is no 'Move Column' (nor 'Rename')
command, therefore the column must be inserted again following the above-described method.
For example: insert a 'Group' column between 'Name' and 'Time'. Select the column 'Time' (i.e. the one
after the column to be inserted; the former turns black), choose Group from the drop-down menu, and
press <Insert>.