User manual

Microgate MicroGraph LED User Manual Page 50 of 88
2.16 STALKER
This program allows you to use the display board together with Stalker speed radars.
2.16.1 SETUP
Keep the LAP-SETUP button pressed for at least 2 seconds to enter the Setup. Press START-MODIFY to change
the displayed values.
Baud
1200…230400|RADIO Set the speed of the serial port applying one of the default values ('1200',
'2400', '4800', '9600', '19200', '38400', '38400', '57600', '115200', '230400',
'RADIO'). Specifying 'RADIO' communication via modem with Linkgate is
activated.
Press LAP-SETUP
Set Speed Unit
KMH | MPH | KNT | M/S Set unit by pressing START-MODIFY (it is possible to choose between
kilometers/hour, miles/hour, knots, and meters/second)
Press LAP-SETUP